Fostex D2424 manual Loading the data using a adat or S/P DIF digital signal

Model D2424 Reference Manual (Saving and Loading Song Data)

Loading the data using a adat or S/P DIF digital signal

Load the data by S/P DIF digital signals (or adat digital signals) from the [DATA INPUT] jack of the recorder.

*Restore the initial settings on the recorder.

*Set the same sampling rate on the external digital device and the recorder.

Connecting the external device

Connect [DATA INPUT] connectors of the recorder to the digital output connectors on the external digital device.

<Notes>

•The recorder has [DATA INPUT] connectors for an S/P DIF digital signal (OPTICAL) and for an adat digital signal. These connectors have the same shape but carry different information.

Use the [DATA INPUT 1-8] connector. Do not use the [DATA INPUT 9-16] and [17-24] connectors.

•Do not remove the optical cable or perform any other operation that would disconnect the S/P DIF signal until the session is complete. Otherwise, the recorder will generate noise, and affect the connected device.

adat or DAT

4	3	2	1	12	11	10	9	8	7	6	5	4	3	2	1
																REMOTERS422
															REMOTE	100Ω	THRU
																ON OFF
8	7	6	5	24	23	22	21	20	19	18	17	16	15	14	13

						WORDWORD
					75Ω
					ON	OFF
			DATA				MIDIMIDI
24 - 17	16 - 9	8 - 1	24 - 17	16 - 9	8 - 1	INPUT	OUTPUT	THRU

SCSISCSI

CAUTION

AVIS: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

AC-IN

DATA INPUT 1-8 adat Out (or Digital Out)

•If the external device has only COAXIAL type (RCA) digital I/O connectors, connect an optional COP-1/96k (optical/coaxial converter) to use an S/P DIF digital signal.

•Connecting both output and input connectors on the recorder to the input and output connectors on the external digital device respectively may generate a digital loop.

Setting up an external device

1.Setup the external device so that it can output a digital signal.

2.Locate the beginning of the pilot signal recorded in the saved data.

* Refer to the instruction manual that came with your external digital device for details.

Executing the load operation

You will use the “Load PGM ?” menu in Setup mode.

• Input format available	:	adat, SPDIF, SCSI, IDE2
• Programs available	:	When using an adat/SPDIF	->P01 - P99 (each program individually)
	:	When using a SCSI/IDE2	->P01 - P99 or All program

• Track available	: When using an adat or DAT ->Tracks 1-8, 1-16, 1-24, 1-32, 1-40
	1-48, 1-56, 9-16, 9-24, 9-32, 9-40, 9-48, 9-56, 17-24, 17-32, 17-40
	17-48, 17-56, 25-32, 25-40, 25-48, 25-56, 33-40, 33-48, 33-56,
	41-48, or 49-56
	: When using a SCSI/IDE2 ->All tracks (1-56) will be automatically
	selected.

89