Fostex D2424 Setting the Midi device number Device ID ? menu, 120, Setting the Midi device ID

Model D2424 Reference Manual (Changing the Initial Setting <SETUP mode>)

Setting BAR/BEAT resolution mode

1.While the recorder is stopped, press the [SETUP] key to enter SETUP mode.

2.Turn the [JOG] dial to select “Resolution ?” (“?” flashes), then press the [EXECUTE/YES] key.

The current BAR/BEAT resolution mode setting appears on the display.

Pressing the [EXECUTE/YES] key turns off the flashing “?” character, and the BAR/BEAT resolution mode setting flashes. With the initial setting, “Off” flashes as shown below.

SETUP

OL			OL	BIT	24
0	0
3		3			FS
6			6
9		9			kHz
12		12			CLOCK
18		18
24		24			INT
30		30
42	42
∞			∞

3.Use the [JOG] dial to turn the mode “On” or “Off”.

When you turn the [JOG] dial clockwise and counter- clockwise, “On” and “Off” flash alternately.

Selecting “On” turns BAR/BEAT resolution mode on, and selecting “Off” turns BAR/BEAT resolution mode off.

4.Press the [EXECUTE/YES] key.

The selected mode setting is stored, and “?” flashes.

To cancel the operation, or to restore the setting obtained prior to the [EXECUTE/YES] key press, press the [STOP] button or the [EXIT/NO] key. Each time you press one of these keys, the recorder returns to the previous hierarchy level of the menu, and finally exits SETUP mode and displays the previous Time Base.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Flashing

SETUP

OL	OL	BIT	24
0	0
3	3		FS
6	6
9	9		kHz
12	12		CLOCK
18	18
24	24		INT
30	30
42	42
∞	∞

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Setting the MIDI device number (“Device ID ?” menu)

The “Setting the MIDI device number” menu enables you to set the recorder device ID number required to control the unit from a sequence software using MMC (MIDI Machine Control) or FEX (Fostex System Exclusive Message).

The transmit device ID links to this setting. You can set the device ID from “00” to “99”.

However, if the device ID number of the message the recorder receives is “7F”, the recorder will recognizes it to perform the corresponding operation, regardless of its device ID setting.

• Initial setting:	[00]
• Option:	[00] ~ [99]

*This setting is shared by all Programs in the same disk.

*The settings cannot be saved and loaded as part of the song data.

*The settings are maintained after you turn off the power to the recorder.

Setting the MIDI device ID

1.While the recorder is stopped, press the [SETUP] key to enter SETUP mode.

2.Turn the [JOG] dial to select “Device ID?” (“?” flashes), then press the [EXECUTE/YES] key.

The current MIDI device ID number appears on the display.

Pressing the [EXECUTE/YES] key turns off the flashing “?” character, and the MIDI device ID number flashes. With the initial setting, “00” flashes as shown below.

SETUP

OL				OL	BIT	24
0	0
3			3			FS
6				6
9		9				kHz
12		12				CLOCK
18		18
24		24				INT
30		30
42	42
∞				∞

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Flashing

SETUP

OL	OL	BIT	24
0	0
3	3		FS
6	6
9	9		kHz
12	12		CLOCK
18	18
24	24		INT
30	30
42	42
∞	∞

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

120