S P E C I A L F E AT U R E S
Changing the PIP Channel
1
Press the Menu button. Move the joystick down to select “PIP”, then press the joystick to enter.
2
Move the joystick down to select “Channel,” then move the joystick to the left or right to change the channel that appears in the PIP window.
Press the Menu button to exit.
▼ | Quick way to access PIP CH: |
Simply press the (PIP) “CH” button on the remote control.
Note: The PIP channels are not available when RF is set to
Changing the Location (Rotating) in PIP mode
When you press the Locate button repeatedly, the PIP window moves from corner to corner on the TV screen.
Scanning the Available Channels
This procedure scans all of the available channels and then stores them in memory.
Press the Scan button, and the memorized channels will appear in sequence for 2 to 3 seconds per channel.
Press the Scan button again to stop the scanning process.
When Scan stops, the viewing mode will return to its original set- ting.
CHAPTER FOUR: SPECIAL FEATURES 4.14