I N S TA L L AT I O N
Connecting a DVD (480i, 480p) Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
Connecting Y, PB , PR
1
Connect a set of audio cables between the DVD audio in jacks on the TV and the AUDIO OUT jacks on the DVD play- er.
2
To enable Component video viewing, connect video cables between the Y, PB, and PR inputs on the TV and Y, PB, and PR (or Y, CB, CR) outputs on the DVD player.
Note: For an explanation of Component video, see your DVD play- er’s owner’s instruction.
Connecting audio and video jacks
1
Connect a set of audio cables between the AUDIO IN jacks on the TV and the AUDIO OUT jacks on the DVD player.
2
Connect video cables between the VIDEO OUT jack on the DVD player and the VIDEO IN jack on the TV.
Note: This figure shows the Standard
2.7 CHAPTER TWO: INSTALLATION