Samsung HCL5515W, HCM6525W, HCL 652W, HCL 473W, HCL 552W, HCL 6515W, HCM653W Adjust Red Convergence

O P E R AT I O N

Adjust Red Convergence

4

While “Red” is highlighted, press the joystick to enter: A crosshair pat- tern will appear on the screen. Move the joystick up/down/left/right to select where to adjust Convergence.

5

If a horizontal red line is visible, use

CH and CH buttons to move the line so that it is superimposed on the horizontal center-line (i.e., make a single horizontal line that is as white as possible.)

6

If a vertical red line is visible, use the VOL + and VOL - buttons to move the line so that it is superim- posed on the vertical-center line (i.e., make a single vertical line that is as white as possible.)

7

For ‘Blue’ adjustment, do the same as the above.

After the red convergence is correctly adjusted, press Menu to exit all the menus.

Note: Since the center convergence adjustments can’t be done after completing the side convergence adjustments, do the center conver- gence adjustments first. If you have done the side convergence adjustments first, then end the Convergence Adjustments by press- ing the Menu button, Then re-start from No. 3 on page 3.4 to adjust the center convergence.

CHAPTER THREE: TV OPERATION 3.5