O P E R AT I O N
Labeling the Channels
Use this feature to assign an
1
Press CH or CH to tune to the channel that will be labeled.
2
Press the Menu button.
Move the joystick down to select “CHANNEL”, then press the joystick to enter.
▼ | Note: You cannot select |
“Labeling” in the A/V mode.
3
Move the joystick down to select “Labeling”.
Move the joystick to the right to begin labeling. The
(Each label has four fields. See top para- graph.)
4
Move the joystick up or down to select a letter, a number, or a blank. (Moving joystick up or down results in this sequence: A,B,...Z, blank, 0,1,...9).
5
Move the joystick to the right switch to the next field, which will be high- lighted. Select a second letter or digit using the joystick(up or down), as above.
Repeat the process to select the last two digits.
Press the Menu button to exit menu.
CHAPTER THREE: TV OPERATION 3.13