Samsung HCL 652W, HCM6525W manual Connecting a DTV Set-Top Box 480p, Connecting Surround Speakers

Models: HCL 6515W HCL 652W HCM6525W

1 67
Download 67 pages 49.58 Kb
Page 21
Image 21
Connecting a DTV Set-Top Box (480p, 1080i)

I N S TA L L AT I O N

Connecting a DTV Set-Top Box (480p, 1080i)

When switching to the DTV mode, either 480p or 1080i format is automatically selected according to the input signal.

Note: Only 480p and 1080i formats are supported.

1

Connect a set of audio cables between the DTV Set-Top Box audio in jacks on the TV and the AUDIO OUT jacks on the DTV Set-Top box.

2

To enable Component video viewing, connect video cables between the Y, PB, and PR inputs on the TV and Y, PB, and PR (or Y, CB, CR) outputs on the DTV Set-Top box.

Note: For an explanation of Component video, see your DTV Set- top box’s owner’s instruction.

Connecting Surround Speakers

(HCL552W/HCL652W/HCL473W/HCM553W/HCM653W only)

1

Connect inputs of an amplifier to the SURROUND OUT outputs of the TV. Then connect the surround speakers to your amp.

Note: This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be different, depending on the model.

CHAPTER TWO: INSTALLATION 2.8

Page 21
Image 21
Samsung HCL 652W, HCM6525W manual Connecting a DTV Set-Top Box 480p, Connecting Surround Speakers, Chapter Two Installation