Y O U R N E W T V
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected continu- ously, such as a VCR or a DVD player.
Because there are two sets of input jacks, you can connect two different A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 2.1 – 2.8.
Œ ANTENNA terminals | ˆ |
Two independent cables or antennas can be | OUTPUT jacks |
connected to these terminals. Use | Connect to the audio/video input jacks of a |
recording VCR. | |
VHF/UHF antennas or your cable system. Use | Note: The monitor out does not operate in DVD |
the | or DTV mode. |
received by the | Ø COMPONENT 1(480i, 480p) |
component (such as a Cable Set Top Box). The | |
PIP channel can be received only when a signal | INPUT jacks |
source is connected to | Connect a source that outputs 480i/480p Y,PB and |
| PR signals, such as a DVD Player. |
´
Connect to an
ˇVIDEO INPUT jacks
Connect to the video output jacks of VCRs, DVD players and similar devices (Two sets are avail- able: Video1 and Video2).
¨AUDIO INPUT jacks
Connect to the audio output jacks of VCRs, DVD players and similar devices.
∏COMPONENT 2(480p, 1080i) INPUT jacks
Connect a source that outputs 480p/1080i Y,PB and PR signals, such as a DTV
”SURROUND OUT
(HCL552W/HCL652W/HCL473W/ HCM553W/HCM653W only)
Connects to a (optional)
CHAPTER ONE: YOUR NEW TV 1.4