Manuals / 3M / Computer Equipment / Projector

3M S10C manual Connecting Power Supply

Models: S10C

1 45

Download 45 pages 46.76 Kb

Page 11

Setting Up (continued)

Connecting Power Supply

WARNING • Please use extra caution when connecting the power cord as incorrect or faulty connections may result in FIRE and/or ELECTRICAL SHOCK. Please adhere to the “Product Safety Guide” and the following.

•Only plug the power cord into outlets rated for use with the power cord’s specified voltage range.

•Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.

•Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.

•Make sure that you firmly connect the power cord to the projector and wall outlet.

1 Connect the connector of the power cord to the AC inlet of the projector. 1

2 Firmly plug the power cord’s plug into the outlet.

AC Inlet Connector Side

1

11

Image 11

3M S10C manual Connecting Power Supply

Contents

S10C Multimedia Projector Contents Preparation Projector FeaturesAttaching The Base Part NamesProjector Happened ProjectorRemote Control Arrangement Setting UpTwisting the elevator feet by hand Adjusting The Projectors ElevatorAdjust the height of the projector by As necessary, you can also finelyConnecting Your Devices Connecting to a DVD/VCR player Connecting Power Supply Putting Batteries Remote ControlRemove Battery cover Close Battery coverOperating The Remote Control Press the button of the projector Power ON/OFFTurning On The Power Or the remote controlUse the focus ring to focus the picture Selecting An Input SignalSelecting a RGB signal Press the RGB button of the remote Use the zoom ring to adjust the screen SizeSwitch the power switch to O OFF Turning Off The PowerProjector or the remote control Temporarily Muting The Sound Adjusting The VolumeOperating Press the Position button Adjusting The PositionUse Buttons to adjust Position Correcting Keystone Distortions Using The Automatic Adjustment FeaturePress the Magnify on button Using The Magnify FeatureUse Buttons to adjust the zoom Level Freezing The ScreenTemporarily Blanking The Screen Signal SearchingSelecting The Aspect Ratio Using The Menu Functions Multifunctional SettingsMain Menu Picture 1 Menu MY Memory Load/Save a SettingReset the PICTURE-1 Menu Items Picture 1 MenuSize PhasePicture 2 Menu Position3D-YCS Input MenuVideo Frame LockS2-ASPECT Input MenuVideo NR InformationSearch AdjustAuto Menu Message Screen MenuStart UP Lamp Time Option MenuScreen Type Lamp Insert the new lamp, and tighten Replacing The LampUnscrew the 2 screws, and slowly Pick up the lamp by the handlesReplace the air filter and the filter cover Reset the filter timerAir Filter Caring For The Air FilterReplacing The Air Filter Caring For The Lens Caring For The Cabinet And Remote ControlOther Care Caring For The Inside Of The ProjectorRelated Messages TroubleshootingRelated Messages Power Lamp Temp Description Regarding The Indicator LampsIndicator Regarding The Indicator LampsPhenomena That May Easily Be Mistaken For Machine Defects Phenomena That May Easily Be Mistaken For Machine Defects Warranty And After-ServiceVideo Input Ports SpecificationsSpecification RGB Input Ports Audio PortsNot Included with Basic Packet How to OrderPart Number DN00571 QR58731