3M S10C manual Projector, Happened

Part Names (continued)

The Projector (continued)

19￿￿keystone button

turns on/off the KEYSTONE

mode.

In the KEYSTONE mode,

To adjust the keystone,

video button 15￿￿

toggles between the signal ports of video, s-videoand component video.

cursor buttons 22￿￿

works for adjusting or menu controlling.

on/off button 14￿￿

prepares for turning the power on/off.

temp indicator 14￿￿

lights or blinks when any problem about internal temperature has happened.

use the cursor / buttons.

Control buttons

22￿￿reset button

cancels the adjustment in progress.

*The adjustments of the volume etc. are not reset.

15￿￿rgb button

selects the input signal of rgb port.

22￿￿menu button

opens/closes the menu.

39￿￿power indicator

tells the state of power supply. Refer to the section “Power ON/OFF”.

39￿￿lamp indicator

lights or blinks when any problem about the lamp has

				happened.
audio		R port	10
		L port	10
(from a video equipment)
audio port	10
(from a computer)
s-video port	10
video port	10			10 control
component video - Y 10				port
				10 rgb port
component video - CB/PB			10

14 Power switch

component video - CR/PR 10

11 AC inlet

Projector (Rear/Left)

5