Operating (continued)
Signal Searching
VIDEO RGB | SEARCH |
ASPECT | AUTO BLANK |
MAGNIFY | VOLUME |
ON |
|
| MUTE |
OFF |
|
FREEZE | KEYSTONE |
1 | Press the SEARCH button. |
Cycle through input signals, displaying the images of retrieved signals. If | |
| no signal is found, returns to the signal that was selected before the search |
| was begun. |
rgb | video | |
|
| SEARCH |
| component video |
|
NOTE • May not function properly with some input signals.
•The signal searching function takes about 10 seconds to display an image.
Selecting The Aspect Ratio
VIDEO | RGB SEARCH |
ASPECT | AUTO BLANK |
MAGNIFY | VOLUME |
ON |
|
| MUTE |
OFF |
|
FREEZE | KEYSTONE |
POSITION | MENU |
| ENTER |
ESC | RESET |
1 Press the ASPECT button. |
|
RGB input | ASPECT |
4:3 |
| 16:9 |
| 15:9 |
| 32:15 |
|
|
|
•At a RGB input, selecting an aspect ratio may display the message “SYNC IS OUT OF RANGE”. In this case, please select one of other aspect ratios.
VIDEO, S-VIDEO, COMPONENT VIDEO input
4:3 
16:9 
WIDE 
ZOOM
•At a COMPONENT VIDEO input of 16:9
•When the 4:3 is selected under the SCREEN TYPE item of the OPTION menu. WIDE and ZOOM cannot be selected.
Temporarily Blanking The Screen
VIDEO | RGB SEARCH |
ASPECT | AUTO BLANK |
MAGNIFY | VOLUME |
ON |
|
1 | Press the BLANK button. |
The input signal screen is shut off, and a blank screen appears. You can | |
| set the blank screen using the menu (from the SCREEN menu, BLANK |
| select BLANK). |
| Press the BLANK button again to remove the blank screen, |
| and return to the input signal screen. |
|
|
|
|
NOTE • The temporarily blanking function will automatically finish if either the STANDBY/ON, SEARCH,
RGB, VIDEO, FREEZE, AUTO, VOLUME, MUTE, POSITION or MENU button of remote control is pressed, or if a button of projector is pressed, or if there is a change in the input signal’s state.
21
