Samsung SPD-2300 user manual Cable Connection, Installation of SPD-3000/2300, English

Installation

Cable Connection

1.First, connect one end of the BNC video cable connector to the Video Output Terminal.

2.Next, connect the other end of the connector to the Video Input Terminal of the monitor.

Monitor In Terminal Video Out Terminal

Monitor

Installation of SPD-3000/2300

• Installation Precautions

- Check out the installation place. It should be strong enough to support more

than 4 times the total product weight including speed dome camera (SPD-

3000/2300) and installation structure.

- Install the camera in a place having more than 500mm of space above the

ceiling board.

- Install the camera holder using the provided installation guide tab, screw and

fastening cable.

ENGLISH

3.Then, connect the Power Adapter Cable. Use a driver (-) to screw one part of the Power Adapter consisting of two lines to the

Power Input Terminal of the camera holder.

4. Connect the Power Adapter’s plug to the Power Outlet.

Power Adapter

5. Connect the Controller Connection Terminal	DATA BOX	Controller Connection
		Terminal
of SPD-3000/2300 and the external Controller.
Controller

- There is a risk of camera falling during installation. Prevent the fall using the

fastening cable while installing the camera. Also, access of other people to

the place should not be allowed during installation.

• Accessories Sold Separately

Use the following accessories sold separately for convenient installation

depending on installation places.

1) On-Ceiling Installation Mount (STB-330PC)

This mount is used to install the camera on the ceiling.

2) Indoor Insertion Housing (STH-330PE)

This housing is used to attach the speed dome camera to the ceiling for installation.

SPEED DOME CAMERA 24 User’s Manual SPEED DOME CAMERA 25 User’s Manual