Functional Description
Day & Night
The darkness level is detected automatically under low light conditions such as at night or under dark light to keep the screen bright and clear.
Camera Setting |
| Camera Setting |
|
Focus |
| Focus |
|
White Balance | ATW(O) | White Balance | ATW(O) |
Exposure |
| Exposure |
|
Back Light | OFF | Back Light | OFF |
AGC | MIDDLE | AGC | MIDDLE |
SSNR | MIDDLE | SSNR | MIDDLE |
Day & Night | AUTO | Day & Night | B/W |
Others |
| Others |
|
Camera Setting |
|
|
|
Focus |
|
|
|
White Balance | ATW(O) |
|
|
Exposure |
|
|
|
Back Light | OFF |
|
|
AGC | MIDDLE |
|
|
SSNR | MIDDLE |
|
|
Day & Night | COLOR |
|
|
Others |
|
|
|
COLOR : Output images are displayed in colour all the time. Burst signal size can be adjusted.
B/W : Output images are displayed in black and white all the time. Burst signal can be kept or removed.
AUTO : Under day condition, the mode is automatically changed into the COLOR mode to keep an optimum colour. At night, the mode is automatically changed into the B/W mode to distinguish dark images clearly.
Notes
•If the AGC is in OFF mode, the Auto mode cannot be used. Only COLOUR or B/W mode can be used.
•If the sunlight or halogen lamp is used in B/W mode, the focus may be blurred compared with the general illumination.
Others
Camera Setting |
| Ohter |
| |
Focus |
| Sync | INTERNAL | |
White Balance | ATW(O) | Stabilizer | OFF | |
Exposure |
| Image Adj |
| |
Back Light | OFF | Freeze | OFF | |
AGC | MIDDLE | |||
|
| |||
SSNR | MIDDLE |
|
| |
Day & Night | COLOR |
|
| |
Others |
|
|
|
Sync: Internal Sync or Line Lock can be selected. Internal Sync is selected by default. Line Sync function can adjust the output phase of more than 1 unit without using sync signal generator. When the AC Line Lock is selected, the phases can be adjusted from 0 to 360 levels. Accordingly, the phase can be adjusted up to 360˚.
Internal | : Internal synchronization |
Line Lock | : Power line synchronization |
Line Lock Phase | : The phase of line sync can be selected from 0˚ to 360˚. Initial |
| value is 225˚. |
Stabilizer : Corrects camera shake.
Notes
•The Stabilizer may not function properly under the conditions described below:
1.Darkness (little or no light) around the subject
2.No contrast on the subject
3.Camera shake speed that is too fast and might not be corrected
4.Stabilizer is disabled while executing pan, tilt, zoom, or focus, or while displaying the camera settings menu.
5.When Stabilizer is ON, part of the screen is ignored before the correction is made. This results in narrower angle of view and reduction in resolution.
ENGLISH
SPEED DOME CAMERA 40 User’s Manual | SPEED DOME CAMERA 41 User’s Manual |