Samsung SPD-3000, SPD-2300 Camera Holder Connection, Camera Holder Initial Settings, English

Part Names and Functions

Camera Holder Connection

Notes

•In order to control the speed dome camera by personal computer, exclusive program should be used.

Camera Holder Initial Settings

Setting Communications Protocol

Use the SW3 of installation bracket to set the communications protocol.

	SW3	Protocol	Baud Rate(BPS)
0		Samsung	9,600
	1	Samsung	19,200
	2	Pelco-D	2,400
	3	Pelco-D	4,800
	4	Pelco-D	9,600
	5	Pelco-P	4,800
	6	Pelco-P	9,600
	7	Samsung Elec.	9,600
	8	Samsung Elec.	19,200
	9	Panasonic	9,600
	A	Panasonic	19,200
	B	Vicon	4,800
	C	Vicon	9,600
	D	Honeywell	9,600
	E	AD	4,800
	F	Bosch	9,600

Notes

•If the speed dome camera is controlled by the Panasonic and Vicon controller, please contact with our company custom satisfication part and technical part.

•Control setting(When using AD Protocol)

-The AD Protocol is only valid for RS-422

-In relation to controller compatibility

1.Display Camera OSD : 3 + Auxiliary ON

2.Exit Camera OSD : 3 + Auxiliary OFF

3.ENTER : IRIS OPEN

4.ESC : IRIS CLOSE

•Please see our homepage for details on the protocol

ENGLISH

SPEED DOME CAMERA 12 User’s Manual SPEED DOME CAMERA 13 User’s Manual