Functional Description
PTZ Position : Pan and Tilt position and Zoom magnification are displayed.
• PTZ positions are not displayed in the OFF mode. (Only manual operation can display them.)
Main Menu | OSD Setting |
| |
Camera Setting | Camera ID | ON | |
Sequence Setting | Camera Name |
| |
P/T Setting | Preset Number | ON | |
OSD Setting | Preset Name |
| |
Sequence Status | OFF | ||
Alarm Setting | |||
Area Name | OFF | ||
Initialize | |||
PTZ Position | ON | ||
Status | |||
Language | English | ||
|
Language : The OSD can be displayed either in English (default setting) or in Chinese.
Main Menu | OSD Setting |
| |
Camera Setting | Camera ID | ON | |
Sequence Setting | Camera Name |
| |
P/T Setting | Preset Number | ON | |
OSD Setting | Preset Name |
| |
Sequence Status | OFF | ||
Alarm Setting | |||
Area Name | OFF | ||
Initialize | |||
PTZ Position | ON | ||
Status | |||
Language | English | ||
|
5) Alarm Setting
Alarm Enable : It can be determined whether to enable the alarm setting.
Main Menu | Alarm Setting |
|
Camera Setting | Alarm Enable | ON |
Sequence Setting | Alarm Input |
|
P/T Setting | Alarm Output |
|
OSD Setting | MD Dwell Time | ON 30 SEC |
Alarm Setting |
|
|
Initialize |
|
|
Status |
|
|
ON/OFF : Alarm is enabled in ON mode.
Alarm Input : Alarm Input Mode/Priority/Method is set up.
Alarm Setting |
|
| Alarm Input |
|
| ||
Alarm Enable | ON |
| IN | 1 | OFF | 1 | OFF |
Alarm Input |
|
| IN | 2 | OFF | 2 | OFF |
Alarm Output |
|
| IN | 3 | OFF | 3 | OFF |
MD Dwell Time | ON | 30 SEC | IN | 4 | OFF | 4 | OFF |
NC/NO/OFF : NC/NO/OFF can be selected depending on the alarm sensor.
1 - 4 (Priority) : Priority for the 4 alarm inputs is set up. Response comes first from the alarm input of higher priority.
Preset/Swing/Group/Tour/Trace/A.Pan:
Whether to enable the operation of Preset/Swing/Group/Tour/Trace/A.Pan by alarm input can be set up. When the alarm is input, it stays in the preset/Swing/ Group/Tour/Trace/A.Pan position.
Alarm Out : One of the 2 Alarm Outs corresponds to each Alarm input.
Alarm Setting |
| Alarm Output |
|
|
|
|
| |
Alarm Enable | ON | Setting | 1 | 1 | 2 | 3 | 4 | MD |
Alarm Input |
| Setting | 2 | 1 | 2 | 3 | 4 | MD |
Alarm Output |
| Timer | 1 | OFF |
|
|
|
|
MD Dwell Time | ON 30 SEC | Timer | 2 | OFF |
|
|
|
|
|
| OUT Off | 1 |
|
|
|
|
|
|
| OUT Off | 2 |
|
|
|
|
|
OUT1 SET/OUT2 SET | : One of the 4 Alarm Inputs corresponds to the 2 Alarm Outputs. |
OUT1 TIME/OUT2 TIME | : For the 2 Alarm Outputs, On/Off and the operation time can be |
| set up in the units of second/minute/hour. |
|
ENGLISH
SPEED DOME CAMERA 54 User’s Manual | SPEED DOME CAMERA 55 User’s Manual |
