Functional Description
Tour : Group surveillance can be executed and set up and data can be deleted.
Sequence Setting | Tour SEQ | |
Preset |
| Setting |
Swing SEQ | Execute | |
Group SEQ | Clear | |
Tour SEQ |
| |
PTZ Trace |
| |
Auto Run |
| |
Power On Resume OFF |
| |
Setting | : The registered Group Sequence is selected with the joystick and | |
| confirmed with the Execution key. If the selected number is not | |
| registered, it cannot be input. Press the Execution key in the location | |
| with selection mark to finish the setting process. | |
Execute : Group surveillance is executed. |
| |
Clear | : Group surveillance data are deleted. |
|
PTZ Trace : Maximum 4 patterns of the manual operation paths (for Pan, Tilt, Zoom and Focus) are memorized and replayed.
Sequence Setting | PTZ Trace | |
Preset | Trace | 1 |
Swing SEQ | Trace | 2 |
Group SEQ | Trace | 3 |
Tour SEQ | Trace | 4 |
PTZ Trace |
|
|
Auto Run |
|
|
Power On Resume OFF |
|
|
Replay : The manual operation paths are repeated and replayed. Stop key will stop the replay.
* If the operation range is limited using | Pan Limit and | Tilt Limit, please note that other operations |
beyond the limited operation range are not possible. |
|
Memorize: Manual operations for minimum 120 seconds after executing this function are memorized into the internal memory. Nevertheless, the memorizing time becomes different depending on the PTZ operation. OVER mark will finish this function.
* If the operation range is limited using | Pan Limit and | Tilt Limit, only the operations within the |
limited range are memorized. |
|
|
Notes
• Press the OSD key to stop the internal memory to continue saving.
Auto Run: If there is no controller operation by the user for a certain time, the sequence operation designated by the user will be executed.
Mode - • OFF : Auto Run will be cancelled.
•Preset : Auto Run in the corresponding Preset number
•Swing : Auto Run in the corresponding Swing mode
•Group : Auto Run in the corresponding Group number
• Tour | : Auto Run in the corresponding Tour number |
• Trace | : Auto Run in the corresponding Trace number |
•A. Pan : 360˚ Auto Run in Pan direction
*Auto Pan Speed: Pan operation in the speed designated by the user
*Tilt Angle: The tilt angle set up by the user is kept.
Time : Auto Run operation is executed after a certain time designated by the user.
*Time can be set up by the unit of
Power On Resume : When the power supply for the camera is stopped for some reason, such as electricity failure, and resumed, the Sequence Settings before the power off are restored.
Sequence Setting | Sequence Setting |
Preset | Preset |
Swing SEQ | Swing SEQ |
Group SEQ | Group SEQ |
Tour SEQ | Tour SEQ |
PTZ Trace | PTZ Trace |
Auto Run | Auto Run |
Power On Resume OFF | Power On Resume ON |
ENGLISH
SPEED DOME CAMERA 46 User’s Manual | SPEED DOME CAMERA 47 User’s Manual |