Toshiba 42HP95 owner manual Selecting the picture mode, Adjusting the picture quality

Chapter 8: Using the TV’s features

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from four picture modes, as described below.

Mode	Picture Quality
Sports	Bright and dynamic picture (factory setting)
Standard	Standard picture settings (factory setting)
Movie	Lower contrast for darkened room (factory setting)
Preference	Your personal preferences

To select the picture mode:

Press PIC MODE on the remote control. The following popup menu appears on- screen.

Picture Settings	Mode: Standard
Mode	Standard

Repeatedly press PIC MODE to cycle

among the modes.PIC MODE

To select the picture mode using the menu system:

1.Press MENU and open the Video menu.

2.Highlight Picture Settings and press ENTER.

Video

Picture Settings

Advanced Picture Settings

Theater Settings

Picture Settings		ANT 1
	Mode	Sports

Contrast100

Brightness50

Color50

Tint0

Sharpness50

ResetDone

3.Press z to highlight the Mode field, and then x• to select the mode you prefer.

Picture Settings	Mode: Standard
Mode	Standard

4.To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER.

Note:

¥The picture mode you selected is for the current input selection only (ANT 1 in the example above). You can select a different picture mode for each input selection.

¥If you select one of the factory-set picture modes (Sports, Standard, or Movie) and then change a picture quality setting (for example, increase the contrast or change the color temperature), the picture mode automatically changes to Preference in the Picture Settings menu.

Adjusting the picture quality

You can adjust the picture quality (contrast, brightness, color, tint, and sharpness) to your personal preferences.

Selection	x Pressing •
Contrast	lower	higher
Brightness	darker	lighter
Color	paler	deeper
Tint	reddish	greenish
Sharpness	softer	sharper

To adjust the picture quality:

1.Press MENU and open the Video menu.

2.Highlight Picture Settings and press ENTER.

Video

Picture Settings

Advanced Picture Settings

Theater Settings

Picture Settings		ANT 1
	Mode	Sports

Contrast100

Brightness50

Color50

Tint0

Sharpness50

ResetDone

3.Press y or z to select the picture quality you want to adjust (Contrast, Brightness, Color, Tint, or Sharpness), and then x and • to adjust the setting, as described in the table above.

Picture Settings Mode: Preference

Sharpness70

4.To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER.

The picture qualities you adjusted are automatically saved in the Preference mode (see “Selecting the picture mode,” above left).

		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.	81
#01E_081-088_4250HP95	81	05.9.12, 10:09 PM
	Black

(E) 42/50HP95 *web 213:276