Toshiba 42HP95 Using the PC setting feature, Using the Long Life feature, Picture Shift

Chapter 8: Using the TV’s features

Using the PC setting feature

You can adjust the horizontal position/size, vertical position/size, clock phase, and sampling clock. This feature will be grayed out on the menu unless there is a PC connected to the TV (See “Connecting a personal computer (PC)” on page 27.)

To set the PC setting:

1.Confirm a PC is connected (see “Connecting a personal computer (PC)” on page 27).

2.Repeatedly press INPUT to select PC input mode. (See “Selecting the video input source to view” on page 69.)

3.Press MENU and open the Setup menu.

4.Highlight PC Settings and press ENTER.

Setup

Installation
Sleep Timer
On/Off Timer
PC Settings
HDMI Audio		Auto
Slide Show Interval		2 Sec
AVHD Skip Time		15 min
Navigate	Select CH RTN Back EXIT Exit

5.Press y or z to highlight the item you want to adjust.

6.Press x or • to make the appropriate adjustments.

PC Settings

Horizontal Position		0
Horizontal Width		0
Vertical Position		0
Vertical Height		0
Clock Phase		0
Sampling Clock		0
	Reset		Done

¥Horizontal Position/Vertical Position:

Adjusts picture left/right and up/down. The adjustment range is within ±5 from center.

(The adjustable range may vary depending on the input mode.)

¥Horizontal Width/Vertical Hegiht:

Adjusts picture width of Horizontal and picture height of Vertical. The adjustment range is within ±5 from center.

¥Clock Phase:

This function is to reduce noise and sharpen the picture. The adjustment range is within ±15 from center.

¥Sampling Clock:

This function is to minimize periodic vertical stripes on the screen.

The adjustment range is within ±15 from center.

Using the Long Life feature

The long life settings (Picture shift, Gray level, Reverse, and White) help to reduce the risk of phosphor burn-in of the plasma screen.

Picture Shift

With Picture Shift set to on, the picture imperceptibly moves around the screen intermittently to reduce the risk of phosphor burn-in of the plasma screen.

Note: To reduce the risk of phosphor burn-in, the default setting for the Picture Shift function is On.

To activate the picture shift feature:

1.Press MENU and open the Setup menu.

2.Highlight Long Life and press •.

Setup

Sleep Timer			Picture Shift	On
On/Off Timer			Gray Level	1
PC Settings			Reverse
HDMI Audio	Auto		White
Slide Show Interval	2 Sec
AVHD Skip Time	15 min
Long Life
Navigate	Select	CH RTN Back EXIT Exit

3.Press y or z to highlight the Picture Shift, and then press

•.

4.Press y or z to select On.

Setup

Sleep Timer			Picture Shift	On
On/Off Timer			Gray Level	1	On
PC Settings			Reverse		Off
HDMI Audio	Auto		White
Slide Show Interval	2 Sec
AVHD Skip Time	15 min
Long Life
Navigate	Select	CH RTN Back EXIT		Exit

To deactivate the picture shift feature:

Select Off in step 4 above.

NOTICE OF POSSIBLE ADVERSE EFFECTS ON

PLASMA DISPLAY

Avoid displaying stationary images on your Plasma display for extended periods of time. Fixed (non-moving) images (including, but not limited to, PIP/POP windows, closed captions, video game patterns, TV station logos, stock tickers, and websites) and special formats that do not use the entire screen, can become permanently ingrained in the Plasma display and cause subtle, but permanent, ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. See pages 4 and 5 for details.

94		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
#01E_089-096_4250HP95	94	05.9.12, 10:10 PM
	Black

(E) 42/50HP95 *web 213:276