Toshiba 42HP95 Viewing the system status, Restore Factory Defaults, To check the system status

Chapter 6: Setting up your TV

Viewing the system status

To check the system status:

1.Press MENU and open the Setup menu.

2.Highlight Installation and press ENTER. (A new set of Installation menu icons will appear on-screen, as shown below right).

Setup

Installation
Sleep Timer
On/Off Timer
PC Settings
HDMI Audio		Auto
Slide Show Interval		2 Sec
AVHD Skip Time		15 min
Navigate	Select CH RTN Back EXIT Exit

System Status

System Infomation

Navigate Select CH RTN Back EXIT Exit

3.Open the System Status menu, highlight System Information, and then press ENTER.

4.Use the x • buttons to scroll through the menu bar to check the Product Information and Software Version.

System Information				System Information
	Product Information				Software Version
	Brand:		Toshiba		0.8.2
	Model:		42HP95
					Jun 13 2005 - 13:54:14
	IEEE1394 GUID:	00003914-28343803				FW:1.41
						Sub:41
		Done				Done

To close the screen and return to the Installation menu:

Highlight Done and press ENTER.

To return to normal viewing:

Press EXIT.

Restore Factory Defaults

To restore all settings and channels to their factory default values:

1.Follow steps 1–3 above.

2.Use the x • buttons to scroll through the menu bar to select Factory Defaults.

System Information

Factory Defaults

This window provides the ability to reset the TV settings.

Type in your PIN now (or "0000" if no PIN has been set) to restore settings to their factory default values.

Done

3.Enter your PIN code (or 0000 if no PIN code has been set).

4.Highlight Yes and press ENTER. The TV will turn off automatically after a few seconds. After the TV turns off, unplug the TV power cord and then plug it in again to complete the restore process.

To cancel the reset:

Highlight No and press ENTER.

54		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
#01E_046-054_4250HP95	54	05.9.12, 10:08 PM
	Black

(E) 42/50HP95 *web 213:276