Toshiba 42HP95 owner manual Appendix, Specifications, E 42/50HP95 *web

11 Appendix

Specifications

NOTE: • This model complies with the specifications listed below.

•Designs and specifications are subject to change without notice.

•This model may not be compatible with features and/or specifications that may be added in the future.

Television System		Video/Audio Terminals (continued)
NTSC standard			HDMIª INPUT:
ATSC standard (8VSB)			HDMI compliant (type A connector)
Digital Cable (64 QAM, 256 QAM; in-the-clear, unencrypted*)
			HDCP compliant
*Encrypted channels can be viewed on this TV
			E-EDID** compliant
using a CableCARD.ª See page 13 for details.			Suggested formats: 1080i, 480p, 480i, 720p
Channel Coverage			HDMI Audio: 2-channel PCM; 32/44.1/48 kHz sampling
VHF: 2 through 13			frequency; 16/20/24 bits per sample
UHF: 14 through 69			PC INPUT:
Cable TV: Mid band (A-8 through A-1, A through I)
			15-pin D-sub Analog RGB
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)			PC AUDIO INPUT:
Ultra band (65 through 94, 100 through 135)			3.5 mm stereo mini jack
Power Source			VIDEO/AUDIO OUTPUT (also for recording):
120 V AC, 60 Hz			VIDEO: 1 V(p-p), 75 ohm, negative sync.
Power Consumption			AUDIO: 150 mV(rms) (30% modulation equivalent,
42HP95: 337 W (average)				2.2 k ohm or less)
57 W in standby mode (Using a CableCARD™)			VARIABLE AUDIO OUTPUT:
53 W in standby mode (Without a CableCARD™)
			0–300 mV(rms) (30% modulation equivalent,
50HP95: 407 W (average)
			2.2 k ohm or less)
57 W in standby mode (Using a CableCARD™)
53 W in standby mode (Without a CableCARD™)			G-LINK™and IR OUTPUT:
Audio Power			3 V(p-p), 3.5 mm mono socket (IR blaster cables supplied)
10 W + 10 W			IEEE1394 INPUT/OUTPUT:
Speaker Type			IEEE1394 compliant 4-pin
Main: Four 2-3/8 ⋅ 4-3/4 inches (60 ⋅ 120 mm)			DIGITAL AUDIO OUTPUT:
Tweeter: Two 1-1/4 inches (32 mm) round			Optical type
Video/Audio Terminals			Headphone jack:
S-VIDEO INPUT:
			3.5 mm stereo
Y : 1 V(p-p), 75 ohm, negative sync.
		Dimensions
C : 0.286 V(p-p) (burst signal), 75 ohm
			42HP95:	Width:	43-3/8 inches (1100 mm)
VIDEO/AUDIO INPUT:
				Height: 30-3/4 inches (778 mm)
VIDEO: 1 V(p-p), 75 ohm, negative sync.
				Depth:	15-3/8 inches (390 mm)
AUDIO: 150 mV(rms) (30% modulation equivalent,
			50HP95:	Width:	49-5/8 inches (1258 mm)
22 k ohm or greater)
				Height: 34-5/8 inches (877 mm)
ColorStream¨ (component video) HD INPUT:				Depth:	15-3/8 inches (390 mm)
Y : 1V(p-p), 75 ohm		Weight
PR: 0.7 V(p-p), 75 ohm
			42HP95:	117.3 lbs (53.0 kg)
PB : 0.7 V(p-p), 75 ohm
			50HP95:	142.6 lbs (64.7 kg)
AUDIO: 150 mV(rms), 22 k ohm or greater
		Supplied Accessories
Suggested formats: 1080i, 480p, 480i, 720p
		•	Two dual-wand IR blaster cables
		•	Remote control with two size “AA” alkaline batteries
		•	Power cord (three wire grounding type)
		•	Noise filter:
			ZCAT2436-1330A-M (see page 14)
_________			ZCAT3035-1330 (see page 14)
		•	Clip (see item 19 on page 3)
** E-EDID = Enhanced-Extended Display Identification
		•	Owner’s Manual (this book)
	Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.				107
#01E_107-111_4250HP95	107			05.9.12, 10:11 PM
Black

(E) 42/50HP95 *web 213:276