Toshiba 42HP95 Setup / Installation menu layout, Navigating the menu system, E 42/50HP95 *web

Chapter 4: Menu layout and navigation

Setup / Installation menu layout

To open the Installation menu (illustrated below), press MENU on the remote control or TV side panel, open the Setup menu, select Installation, and press ENTER.

From Main Menu/Setup menu, select “Installation”

sub-menu➔

Terrestrial	➞ Input Configuration ➞ [ Input Configuration Window ]
	➞ Channel Program	➞ ANT1
		➞ ANT2 } ➞ [ Scan for new channels on desired Antenna ]
	➞ Channel Add/Delete ➞ [ Channel Add / Delete Window ]
	➞ Signal Meter ➞ [ Signal Meter Window ]
Devices	➞ IEEE1394 Devices ➞ [ IEEE1394 Device Management Window ]
	➞ TheaterNet Devices ➞ [ TheaterNet Setup Window ]

TV Guide On Screen™ Setup ➞ Start ➞ [ Launch the TV Guide On Screen™ to its Installation area ]

Time and Date ➞ Start Setup ➞ [ Time And Date Setup Window ]

System Status ➞ System Information ➞ [ System Information Window ]

Navigating the menu system

You can use the buttons on the remote control or TV side panel to access and navigate your TV’s on-screen menu system.

•Press MENU to open the menu system.

•Use the up/down/left/right arrow buttons (yzx •) on the remote control or TV side panel to move in the corresponding direction in a menu.

•Press ENTER to save your menu settings or select a highlighted item. (A highlighted menu item appears in a different color in the menu.)

•All menus close automatically if you do not make a selection within 60 seconds, except the signal meter menu which closes automatically after 5 minutes.

•To close a menu instantly, press EXIT.

TV side panel

y

z

•

x

MENU (ENTER*)

EXIT

*The MENU button on the TV side panel functions as the ENTER button when a menu is on-screen.

Remote control

MENU

ENTER

y

x •

z

EXIT

38		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
#01E_037-038_4250HP95	38	05.9.12, 10:06 PM
	Black

(E) 42/50HP95 *web 213:276