Chapter 8: Using the TV’s features

Adjusting the picture (continued)

Using MPEG noise reduction

The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. Choices for MPEG noise reduction are High, Medium, Low and Off. Off is automatically selected when this feature is disabled (“grayed out”). This feature is not available in the PC input mode.

To select the MPEG noise reduction level:

1.Press MENU and open the Video menu.

2.Highlight Advanced Picture Settings and press ENTER.

Video

Picture Settings

Advanced Picture Settings

Theater Settings

3.Press z to highlight the MPEG Noise Reduction field, and then press x or • to make a selection.

Advanced Picture Settings

 

ANT 1

 

Dynamic Contrast

 

On

 

 

MPEG Noise Reduction

 

Off

 

 

CableClear

 

Auto

 

 

Color Temperature

 

Cool

 

 

 

 

 

 

 

 

 

 

Reset

 

Done

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER.

Using dynamic contrast

When dynamic contrast is set to “On,” the TV will detect changes in the picture quality that affect the appearance of your contrast settings and then automatically adjust the video.

When dynamic contrast is set to “Off,” the settings selected in the Contrast field in Picture Settings will be used.

To select dynamic contrast preferences:

1.Press MENU and open the Video menu.

2.Highlight Advanced Picture Settings and press ENTER.

Video

Picture Settings

Advanced Picture Settings

Theater Settings

3.Press z to highlight the Dynamic Contrast field, and then press x or • to make a selection (On or Off ).

Advanced Picture Settings

 

ANT 1

 

Dynamic Contrast

 

On

 

 

MPEG Noise Reduction

 

Off

 

 

CableClear

 

Auto

 

 

Color Temperature

 

Cool

 

 

 

 

 

 

 

 

 

 

 

Reset

 

 

Done

 

 

 

 

 

 

 

 

 

 

4.To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER.

Note:

If you select one of the factory-set picture modes (Sports, Standard, or Movie) and then set the dynamic contrast to ÒOn,Ó the picture mode automatically changes to Preference in the Picture Settings menu.

 

 

Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

83

 

 

 

#01E_081-088_4250HP95

83

05.9.12, 10:09 PM

 

 

Black

 

 

(E) 42/50HP95 *web 213:276

Page 83
Image 83
Toshiba 42HP95 owner manual Using Mpeg noise reduction, Using dynamic contrast, To select the Mpeg noise reduction level