Electrolux 65050 VI manual Prior to using for the first time, Water softener

Operating Instructions

Prior to using for the first time

Prior to using for the first time, remove all the clips with which the baskets are secured for transport.

Then perform the following steps: 0 1. Adjust the water softener

2.Fill with Salt for the Water Softener

3.Fill with Rinse Aid

Water softener

To avoid scale deposits on the dishes and in the dishwasher, the dishes must be washed with soft water, i.e. water with a low lime content. The dishwasher therefore has a built-in water softener, in which tap water with a hardness of 4°d (German degree) and harder is softened with the aid of special salt.

3	Your water supplier will be able to inform you about the hardness and
	hardness range of the water in your area.
	The water softener can be set manually using the water hardness
	switch; it can also be set electronically using the buttons on the control
	panel.
	Water hardness			Adjusting the		Indication	Number of
				hardness setting		on the	acoustic
						multi-dis-
							signals 1
	In °d 2	In mmol/l 3	Range	Manually	Electronically	play
	51 - 70	9,0 - 12,5			10 4	10l	10
	43 - 50	7,6 - 8,9		1	9	9l	9
	37 - 42	6,5 - 7,5	IV		8	8l	8
	29 - 36	5,1 - 6,4			7	7l	7
	23 - 28	4,0 - 5,0			6	6l	6
	19 - 22	3,3 - 3,9	III		5	5l	5
	15 - 18	2,6 - 3,2			4*	4l	4
	11 - 14	1,9 - 2,5	II	0*	3	3l	3
	4 - 10	0,7 - 1,8	I/II		2	2l	2
					1
	under 4	under 0.7	I		no salt	1l	1
					necessary

10