Manuals / Electrolux / Kitchen Appliance / Dishwasher

Electrolux 65050 VI menced programme. The programme will continue, Centre, The siphon is blocked

Models: 65050 VI

1 48

Page 35

Operating Instructions

	Malfunction	Possible cause	Remedy
	Two short continuously	The siphon is blocked.	Clean out siphon.
	repeated warning tones
	can be heard; the pro-	The water drain hose
	gramme display for the	The water drain hose	Check hose installation.
	selected programme is flash-	has not been correctly	Check hose installation.
	ing; error code Å 20 is dis-	laid.
	ing; error code Å 20 is dis-
	played in the multi-display.
	Three short continuously
	repeated warning tones	The leak prevention sys-	Turn off the tap and contact
	can be heard, error	The leak prevention sys-	your local Service Force Cen-
	code Å 30 is displayed in the	tem has been triggered.	tre.
	multi-display.
	After rectifying an Å 10 or Å 20 error, press the button for the com-
	menced programme. The programme will continue.
	If the fault is displayed again, please contact your local Service Force
	Centre.
3	For all other errors displayed, please contact your local Service Force
	Centre stating the error code (see chapter: Service and Spare Parts).

Page 35

Image 35

Electrolux 65050 VI menced programme. The programme will continue, Centre, The siphon is blocked, has not been correctly

Contents

Fully Integrated Dishwasher User Instructions FAVORIT 65050Dear customer Appliance Features, Display and Control Panel CONTENTSSetting the amount of special salt to be added Adjusting the Height of the Upper BasketContents Installation and Connection InstructionsGeneral Safety 1 Safety InstructionsInstallation, Connection and Placing into Operation Child SafetyCorrect Use Disposal of Old Appliances 2 Disposal2 Economical and Ecological Dishwashing Disposing of the Packaging MaterialOperating Instructions PanelAppliance Features, Display and Control The multi-display can indicate Display and control panelWater softener Prior to using for the first timeSetting electronically Setting the water softenerSetting manually Setting the amount of special salt to be added Special salt for the water softenerWater can be softened in one of two ways 2l to 10l Adding special saltRinse aid can be added in one of two ways Rinse aidActivating/deactivating the inflow of rinse aid Adding rinse aid Adjusting Rinse Aid Dosing Activating/deactivating the acoustic signal Loading Cutlery and Dishes In Daily UseLoading Cutlery cannot open on removal from the To ensure that the cutlery rackOperating Instructions it is possible to open the cutleryfolded over to the left Loading Pans, Frying Pans and Large PlatesType 4 The two rear plate inserts in the lower basket can be folded folded across one anotheracross one another Type 3 The right-hand plate inserts in the lower basket can beOperating Instructions Loading Cups, Glasses and Coffee Servicesoffset from each other and water can reach all items The cup racks can be folded up out of the way for tall itemsRaising the Upper Basket Adjusting the Height of the Upper BasketLowering the Upper Basket Fill with detergent Filling with DetergentUse of 3 in 1/ Combi Detergent Tablets General AdviceSpecial Advice Automatic Wash Programmes Concentrated DetergentDetergent tablets Type of Selecting the programme Programme TableDinner service and Operating InstructionsChanging a programme Starting a programmeChanging/interrupting/aborting a programme Interrupting the programme by opening the dishwasher door Setting or changing the start delayAborting the programme RESET Setting the start delayLoad Sensing - Sensor Logic Changing the start delayCancelling the start delay Changing the programme after the start delay has been set3 Removing the dishes Care and CleaningSwitching off the dishwasher Cleaning the Filter What to do, if Error messages are displayedThe siphon is blocked ing error code Å 20 is dismenced programme. The programme will continue CentreThe dishes are wet and dull there are problems with the operation of the dish- washerthe wash results are not satisfactory The dishes are still dirtyThere are dried water drops on the glasses and dishes Technical DataOperating Instructions Notes for Test InstitutesSample loading arrangements Installing the Dishwasher INSTALLATION AND CONNECTION INSTRUCTIONSWidth Fitting the Furniture Door PanelInstallation and Connection Instructions WeightConnect the inlet hose Connecting the DishwasherWater Connection Permitted water pressurePlease take care when installing the water inlet hose Water inlet hose with safety valveSink outlet connection Water drainDrain hose Extension hosesried out by a qualified electrician or competent person Leak prevention systemElectrical Connection Changing a fuseConnections European Guarantee GUARANTEE CONDITIONSGuarantee Conditions Standard guarantee conditionsCustomer Care SERVICE AND SPARE PARTS08705 929 Subject to change without notice AEG Hausgeräte GmbH Postfach D-90327 NürnbergCopyright by AEG 822 960 471 -00

The siphon is blocked.

selected programme is flash-

has not been correctly

ing; error code Å 20 is dis-

played in the multi-display.

Turn off the tap and contact

code Å 30 is displayed in the

tem has been triggered.

menced programme. The programme will continue.

Centre.