Electrolux 65050 VI manual Adding special salt, 2l to 10l

SALE SALT SALZ SEL

Operating Instructions

0 1. Set the water softener manually and electronically to the desired water hardness:

	Manual	Electronic	Multi-display	Addition of special salt
	setting	setting	indicator
	0	1	IL	Do not add special salt.
			2l to 10l	Addition of special salt
	0 - 1	2-10		via salt container
				(factory setting)
3	If the water softener is electronically set at “1” for the purpose of using
	detergent that includes special salt, the special salt indicator is deacti-

vated.

Adding special salt

If you are using dishwasher detergent and special salt separately, add the special salt:

–Before using the dishwasher for the first time.

–When the indicator for special salt J is illuminated on the control panel.

0 1. Open the door, remove the lower basket.

2. Undo the lid on the salt container by turning it anticlockwise.

3.When using for the first time: fill the salt container with water.

4.Place the funnel supplied on the con-

tainer opening.

Fill the container with salt through

the funnel; the capacity of the con- tainer is approx. 1.0-1.5 kg depend- ing on the grain size. Do not overfill

the salt container with salt.

3	The water expelled by filling the salt container with salt runs out of the
	salt container onto the base of the washing compartment. This is not a

cause for concern, the water will be pumped out at the start of the next wash programme.

5.Clean any salt remnants on the container opening.

13