Operating Instructions
Changing the start delay:
As long as the programme has not started, you are still able to cancel the start delay by pressing the b button.
Cancelling the start delay:
As long as the programme has not started you are still able to cancel the start delay. Continue pressing the b button until the length of the selected programme appears in the
Changing the programme after the start delay has been set:
As long as the programme has not started, you are still able to change the start delay set by pressing a programme button.
0 1. Press the button for the new programme and hold it down.
First, the indicator for the programme that has just been selected will flash.
After several seconds only the indicator for the new programme will be flashing.
2.Release the programme button.
3.Close the door.
The programme will start automatically following a countdown of the hours set.
Load Sensing – Sensor Logic
If a wash programme is started even though there are only a few dishes in the upper and/or lower basket, an intelligent electronic system adjusts the amount of water and the duration of the wash programme to the number of dishes. By this means it is possible to wash only a few dishes quickly and economically. At half load (6 place settings), up to 2 litres of water and 0.2 kWh of electricity are saved.
31
