Operating Instructions
What to do, if ...
Try to rectify minor faults on the dishwasher with the aid of the instructions given here. If you call an engineer to resolve a of fault listed here, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.
...Error messages are displayed.
If your appliance is equipped with an optical floor signal, in the event of an error a
3 | Errors will only be indicated acoustically if the acoustic signal has been | ||
| activated. |
|
|
| If, as listed in the table below, any of the indicators in the control panel | ||
| or the display panel are flashing or are illuminated, and/or if an acous- | ||
| tic signal can be heard, you can probably rectify the fault yourself. | ||
|
|
|
|
| Malfunction | Possible cause | Remedy |
|
| The tap is blocked or | Clean tap. |
|
| furred with | |
|
|
| |
|
| The tap is turned off. | Turn the tap on. |
| One continuously repeated | The filter (where |
|
| present) in the | Clean the filter in the | |
| warning tone can be heard; | threaded hose fitting at | |
| the programme indicator for | the water inlet valve is | threaded hose fitting. |
|
| ||
| the selected programme is | blocked. |
|
| flashing: The ^indicator is |
| Press the button for the |
| continuously illuminated: |
| |
|
| commenced programme; | |
| Error code Å 10 is displayed |
| |
| Filters in the base of | then abort the programme | |
| in the | ||
| by pressing RESET (see chap- | ||
| no water running into the | the washing compart- | |
| ter: “Starting a programme”); | ||
| dishwasher. | ment are blocked. | |
| Starting a programme clean | ||
|
|
| |
|
|
| out the filters (see chapter: |
|
|
| “Cleaning the filters”). |
|
|
|
|
|
| The water inlet hose has | Check hose installation. |
|
| not been correctly laid. |
|
34