Apex Digital 5708009-C manual Error Codes, 1. Error Code Table, Error Code Description, Solution

Apex 1 to 5.5 kW Generator

If you answered yes to any one of the previous questions and the Apex passed the Internal Diagnostics test, the Apex is probably working properly and it may be reacting to an external load condition. You may want to consult your Process Engineer or system manufacturer to troubleshoot chamber related issues.

ERROR CODES

Error codes indicate a fault condition and report the most recent active error or alarm condition from the Apex unit. You can able to view error codes through a serial communication port such as RS-232. Another way to view error codes is through the Virtual Front Panel which provides an easy way to control an Apex generator through a personal computer. Call AE Global Support for information. The following table explains the specific error code meanings and solutions.

Table 6-1.Error Code Table

Error Code	Error Code Description	Solution
E000	No Error
E001	If the unit is unable to reach or maintain the	To avoid this error,
Out of setpoint	programmed output level within a specified amount	you can disable the
timer expired	of time, the output shuts off and this error code is	timer, increase the
	reported. This timer is enabled and set through the	amount of allowable
	serial communications port.	time, or try to
		determine why the
		unit is not reaching
		setpoint. See “Power
		Limit LED is Lit” on
		page 6-5.
		To clear this error
		code, you must send
		an RF OFF command
		to reset the Apex
		unit.
E004	This error is the same as when the Overtemp LED	See “Overtemp LED
Over	is on solid,	on Solid” on
Temperature		page 6-4.
Shutdown

5708009-C 6-7