Apex Digital 5708009-C manual Odu Connector

Apex 1 to 5.5 kW Generator

Before making any input line power connection, turn off circuit breakers supplying input power to the Apex generator.

Non-standard connectors for input and/or output power must be inaccessible to the user.

If your unit does not have a circuit breaker, install and operate it with a circuit breaker on the ac input to provide over-current protection. The circuit breaker must have a trip value as specified in the line current section of Table 3-2. on page 3-5.

ODU CONNECTOR

The following section describes the ODU input connector. To determine if your Apex unit has this connector, use the configuration PIN from your Apex unit and the following Configuration Note.

This section of the manual provides information for the:

ODU input connector

PIN position13, (A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17) option A. (When identifying the PIN position, remember that the A at the beginning of the PIN is not counted as a position. The PIN option is the number or letter you should look for in the specified position.)

For more information about the PIN and for a complete list of how PIN positions correspond to Apex product options, see Table 1-1. on page 1-4.

Figure 5-5 shows the ODU input connector. The pin numbers are labeled in the illustration.

5708009-C 5-7