Apex Digital 5708009-C manual 1. Physical Specifications Continued, AC power input connector

Apex 1 to 5.5 kW Generator

Table 3-1.Physical Specifications (Continued)

Description	PIN Option—Specification
AC power input connector	A—ODU connector (see “ODU Connector” on
Note: Varies according to the	page 5-7)
option defined by PIN	B—Non-terminated 3 m, 4-conductor, shielded pigtail
position 13.	(see “NonTerminated, four-Conductor Pigtail” on
	page 5-8)
	C—Non-terminated 12¢, 4-conductor, pigtail (see
	“NonTerminated, four-Conductor Pigtail” on page 5-8)
	D—Harting Type Han-Q (see “Harting Type Han-Q
	Connector” on page 5-9)
	E—4-terminal, stud mount
	F—15´ 4-conductor, with a Hubbell CS8365C plug
	G—5´ Harting
	H—Term 3m, 4 cond, shielded pigtail Marinco 3015P
	J—5’ terminated, 4 conductor, SH with contact LS1
	BF.F6 5+PE (30A)
	K—ODU connector with 20 degree rotation
	L—Harting Type Han-Q (16A) rotated 180 degrees
	M—6’,4 conductor with #10 ring lugs on each wire
RF output connector	0—exclusive option #1
Note: Varies according to the	1—7/16 connector (see “Connecting Output Power” on
option defined by PIN	page 5-5)
position 11.	2—SQS‘connector (see “Connecting Output Power” on
	page 5-5)
	3—LC connector (see “Connecting Output Power” on
	page 5-5)
	4—HN (see “Connecting Output Power” on page 5-5)
	5—N (see “Connecting Output Power” on page 5-5)
	6—exclusive option #2
RF Connector location	0—opposite end from water connections
Note: Varies according to the	1—utilities end (near water connections)
option defined by PIN
position 10.

5708009-C 3-3