Apex Digital 5708009-C manual Bytes Data Bytes 201, 202, 203, 205, Time, 206, 210, Shutdowns

Apex 1 to 5.5 kW Generator

Table 4-6.Host Port Commands for RS-232 with AE Bus (Continued)

Command		Number of	Number of
	Description	Host Data	Response
		Bytes	Data Bytes
201	Reports a count of unit on events		4 data bytes
report unit	Note: The response contains 4 bytes which		32-bit value
on events
	represent a 32-bit count of events (LSB
	first).
202	Reports a count of output on events		4 data bytes
report	Note: The response contains 4 bytes which		32-bit value
output on
	represent a 32-bit count of events (LSB
events
	first).
203	Reports a count of overtemp events		4 bytes
report	Note: The response contains 4 bytes which		32 bit value
overtemp
	represent a 32-bit count of events (LSB
events
	first).
205	Requests the amount of time (in seconds) that		4 data bytes
read run	the generator was producing output.		32-bit value
time	Note: The response contains 4 bytes which
	represent a 32-bit time (LSB first). It
	returns the amount of time in seconds
	that the unit was producing output.
206	Requests the total amount of energy (in kWh)		4 data bytes
read total	delivered by the generator.		32-bit value
energy	Note: The response contains 4 bytes which
output
	represent a 32-bit time (LSB first). It
	returns the amount of energy in kilo
	watt hours delivered by the unit.
210	Returns faults, warnings, and shutdowns		1 data byte
report fault	Note: The response contains 1 data byte		8-bit value
warnings
	which represents fault warnings and
and
	shutdowns.
shutdowns
	• bit 0 indicates ripple warning
	(0 = inactive, 1 = active)
	• bit 1 indicates ripple failure
	(0 = inactive, 1 = active)
	• bit 2 indicates temperature rate failure
	(0 = inactive, 1= active)

5708009-C 4-55