Apex Digital 5708009-C manual Apex User Port Options, Pin Apex Standard User Port

Advanced Energy®

APEX USER PORT OPTIONS

The following sections provide information for each of the User port options available with the 1 to 5.5 kW Apex generator. These options are:

•“25-Pin Apex Standard User Port” on page 4-2

•“15-Pin User Port (Exclusive—Option D)” on page 4-16

•“15-Pin User Port (Exclusive—Option E)” on page 4-26

Not all of these sections apply to any one Apex unit. To identify the section that applies to your unit, see “Using this Manual to Find Information for Your Generator” on page 1-1. Each of these sections also contains a PIN configuration note, which will help you confirm whether or not a particular section applies to your unit.

25-Pin Apex Standard User Port

The following section describes the Apex standard 25-pin User port. To determine if your Apex unit has this interface, use the configuration PIN from your Apex unit and the following Configuration Note.

This section of the manual provides information for the:

Apex standard 25-pin User port option

PIN position 8, (A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17) option B. (When identifying the PIN position, remember that the A at the beginning of the PIN is not counted as a position. The PIN option is the number or letter you should look for in the specified position.)

For more information about the PIN and for a complete list of how PIN positions correspond to Apex product options, see Table 1-1. on page 1-4.

This User port is the standard option.

The User port uses a 25-pin, shielded, female, subminiature-D connector.

Figure 4-1.User Port connector 25 Pin APEX Standard

4-2 5708009-C