Apex Digital 5708009-C manual Read this Section, Understanding PIN Numbers and Apex Configuration

Apex 1 to 5.5 kW Generator

Introduction

This chapter contains several kinds of introductory information.

Chapter

1

•“Using this Manual to Find Information for Your Generator” on page 1-1 provides important instructions on locating the information in this manual that is applicable to your Apex unit.

•“Interpreting the Manual and Unit Labels” on page 1-9 provides information on interpreting the type conventions, safety warnings, and labels found in this manual and on the Apex unit.

•“Safety” on page 1-12, “Product Safety/Compliance” on page 1-12, and “Installation Requirements” on page 1-15 provide important safety and compliance information about the Apex generator.

READ THIS SECTION!

To ensure safe operation, you should read and understand this manual before you attempt to install or operate the Apex unit. At a minimum, read and heed “Safety” on page 1-13.

USING THIS MANUAL TO FIND INFORMATION FOR YOUR GENERATOR

The Apex generator can be ordered with many configurable options such as different output levels, input and output connectors, and so on. This manual covers many of these options, some of which will apply to your generator and some of which will not. This section of the manual is designed to help you quickly find the information that applies to your unit.

Note: This manual does not cover all the Apex generators; some units are covered in other manuals. To make sure that you will be able to find the correct information, use the manual that came with that specific unit.

Understanding PIN Numbers and Apex Configuration

The options installed on any Apex generator (that is, the configuration of the generator) are defined by an PIN number that is located on the serial number tag of the generator. Figure 1-1 is an example of a serial number tag.

5708009-C 1-1