ZyXEL Communications 128MH user manual TCP/IP Remote Node Configuration

Prestige 128MH PSTN Router/Hub

The following table shows the TCP/IP related fields in Menu 11.3 - Remote Node Network Layer Options.

Table 5-2.	TCP/IP Remote Node Configuration
Rem IP Address		This will show the IP address you entered for this remote node
		in the previous menu.
Rem IP Subnet		Enter the subnet mask for the remote network.
Mask
My WAN Addr		Some implementations, especially the UNIX derivatives,
		require the WAN link to have a separate IP network number
		from the LAN and each end must have a unique address within
		the WAN network number. If this is the case, enter the IP
		address assigned to the WAN port of your Prestige.
		Note that this is the address assigned to your local Prestige,
		not the remote router.
		(See Figure 5-3 for an explanation of My WAN Addr. With
		Sample IP Addresses)
Single User		Set this field to [Yes] to enable the Single User Account feature	[Yes/No]
Account		for your Prestige. Use the space bar to toggle between [Yes]
		and [No]. See Chapter 3 - Internet Access Application for more
		information on the Single User Account feature.
Server IP address		If you enable Single User Account and you want to make a
		server on your LAN accessible to the outside world, enter that
		server’s inside IP address here.

5-4 Remote Node TCP/IP Configuration