ZyXEL Communications 128MH user manual Default Dial-in Setup Fields continued, Description, Option

Prestige 128MH PSTN Router/Hub

Table 8-2.	Default Dial-in Setup Fields (continued)
Field		Description	Option
Dial-In IPX Net. Num.		This field tells your Prestige to provide the remote host with an	[Yes/No]
Supplied By: IPX Pool		IPX network number from the pool. Otherwise, your Prestige
		will generate a random IPX network number.	(Default = No)
IPX Start Net. Num.		This field is applicable only if you selected [Yes] in the Dial -In
		IPX Net. Num. Supplied By: IPX Pool field. The IPX pool
		contains contiguous IPX network numbers and this field
		specifies the first one in the pool.
IPX Count (1,16)		Enter the number ([1] - [16]) of network numbers in the IPX	[1] to [16]
		Pool. For example, if the starting number is 12345678, and the
		count is [2], then the IPX pool will have 12345678 and
		12345679.
Session Options:		Enter the filter set(s) to apply to the incoming and outgoing	Default = blank
Input Filter Sets		traffic between your Prestige and the remote dial-in user. Keep
		in mind that the filter set(s) will only apply to remote dial-in
Output Filter Sets		users but not the remote nodes.
		You can choose from 12 different filter sets. In addition, you
		can link up to 4 filter sets together for further customization (for
		example, 1, 5, 9, 12).
		Note that spaces and [-] symbol, are accepted in this field. For
		more information on customizing your filter sets, see Chapter 9
		- Filter Configuration. The default is blank, i.e., no filters.
Session Options:		This value is the number of idle seconds that elapses before
		the dial-in user is automatically disconnected when the Prestige
Idle Timeout		is calling back. Idle The idle timer is reset whenever there is
		traffic from the Prestige.
		This field will only be used when calling back; otherwise, the
		idle timeout is governed by the caller.

Once you have completed filling in Menu 13 - Default Dial-in Setup, press [Enter] at the message [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel.

Dial-In Server Configuration 8-7