ZyXEL Communications 128MH AT Command Strings, Advanced WAN Port Setup AT Commands Fields

Prestige 128MH PSTN Router/Hub

Refer to Table 2-6 for details on how to fill in the AT commands fields.

Table 2-6.	Advanced WAN Port Setup AT Commands Fields
Field		Description	Default
AT Command Strings :
	Dial	Enter the AT Command string to make a call.	[atdt]
	Drop	Enter the AT Command string to drop a call. [~] represents a one	[~+++~ath]
		second wait.
		Enter the AT Command string to answer a call.
	Answer		[ata]
Drop DTR When Hang		When [Yes] is selected, your Prestige will drop the DTR signal	Toggle
Up		after sending out [AT Command String: Drop].	[Yes/No]
			(Default=[Yes])
AT Response Strings:
CLID (Caller Line		Enter the keyword preceding the CLID in the response from the	[NMBR]
Identification)		WAN device if present. CLID is required for CLID authentication.
	Called ID	Enter the keyword preceding the dialed number.	[TO]
	Speed	Enter the keyword preceding the connection speed from AT	[CONNECT]
		Response String.

When you have completed this menu, press [Enter] to return to Menu 2.1.

AT Command Strings

For the regular telephone lines, the default “Dial” string tells the modem that the line uses tone dialing. If your switch still requires pulse dialing, change the string to “atdp”. For ISDN lines, there are far more protocols and operational modes. Please consult the documentation of your TA, for you may need additional commands in both “Dial” and “Init” strings.

Hardware Installation & Initial Setup 2-21