Prestige 128MH PSTN Router/Hub
The following Table 7-3 describes the Bridge Static Route Menu.
Table | Bridge Static Route Menu Fields | |
|
|
|
Field |
| Description |
|
|
|
Route Name |
| Enter a nam e for the bridge static route for identification purposes. |
|
|
|
Active |
| Activate/deactivate the static route. |
|
|
|
Ether Address |
| Enter the MAC address of the destination machine that you wish to bridge the packets |
|
| to. |
|
|
|
IP Address |
| If available, enter the IP address of the destination machine that you wish to bridge the |
|
| packets to. |
|
|
|
Gateway Node |
| Enter the number of the remote node that is the gateway of this static route. When a |
|
| packet’s destination Ethernet (MAC) address matches the value entered above, it will |
|
| trigger a call to this remote node. |
|
|
|
Once you have completed filling in this menu, press [Enter] at the message [Press ENTER to Confirm…] to save your configuration, or press [Esc] to cancel.
Bridging Setup |