Prestige 128MH PSTN Router/Hub
6.2Prestige in an IPX Environment
There are two scenarios in which your Prestige is deployed, depending on whether there is a
Seed Router (Client Side)
Assigns Network Number
NetWare 
Clients
Not Seed Router (Server Side)
Learns Network Number
NetWare
Prestige 128MH | Server |
|
NetWare server on the LAN, as depicted in the following diagram.
Figure
6.2.1 Prestige on LAN with Server
If your Prestige is on a LAN with a seed router, you do not need to configure the LAN network numbers. Your Prestige will learn the network number from the seed router and add the routes to its routing table.
6.2.2 Prestige on LAN without Server
Each IPX network must have a seed router. If you only have NetWare clients on your network, then you must configure the Prestige as a seed router and set up unique network numbers for each frame type enabled using the Ethernet Setup Menu.
Remote Node IPX Configuration |
