Prestige 128MH PSTN Router/Hub
Table | Async WAN Port Setup Menu Fields (continued) |
|
|
|
|
Phone | Enter the telephone number assigned to your telephone line by your | 5551212 |
Number | telephone company. Note that your Prestige only accepts digits; do not |
|
| include dashes and spaces in this field. | (example) |
|
|
|
Device Type | For WAN Port, use the space bar to select one of the following types: | |
| [Modem / ISDN TA / X.25 PAD / 56K Modem]. A Device Type is | toggle |
| selected for the WAN Port such that a Remote Node only picks up a | [Modem] |
| free device of the selected type to dial out. Only the WAN Ports of the | |
|
| |
| same device type can be bundled. This field is not applicable if the | [ISDN TA] |
| Connection Type is s et to [Leased]. The device types for the internal | [X.25 PAD] |
| modems are Modem by default. | |
|
| |
|
| [56K Modem] |
Port Speed | Use the space bar to select the speed between the WAN port and the | 115200 |
| external device. Available speeds are: |
|
| 9600 / 19200 / 38400 / 57600 / 115200 / 230000 bps | (default) |
|
| |
|
|
|
AT Command | Enter an AT command string to initialize the modem or ISDN TA. When | (Default: ats0=0) |
String: Init | the Connection Type is set to [Switch], you mus t include AT command |
|
| “s0=0” to disable modem auto |
|
| answer an incoming call. |
|
| Note the default AT command string [at&fs0=0w2s95=1] for the |
|
| internal modems. |
|
|
|
|
Advanced | To edit the Advanced Setup for this Modem/ISDN TA, move the cursor | [Yes/No] |
Setup | to this field, use the space bar to select [Yes] and press [Enter]. This will |
|
| bring you to Menu 2.1.1 - Advanced Setup. |
|
|
|
|
When you complete this menu, press [Enter] to save your configuration, or [Esc] to cancel. After you press [Enter], the Prestige uses the information you have saved to initialize the WAN Port and the connected Modem/ISDN TA.
Hardware Installation & Initial Setup |