Prestige 128MH PSTN Router/Hub
Chapter 12
Telnet Configuration and Capabilities
12.1 About Telnet Configuration
Before the Prestige is properly setup for TCP/IP, the only option for configuring it is through the
Telnet from any station | TCP/IP Network | |
on the Network | ||
| ||
Prestige with |
| |
Network IP Address | ||
Modem/ISDN TA | PSTN/ISDN Network | |
Modem / ISDN TA | ||
56 Kbps | PSTN Network | |
56 Kbps | (Telephone Line) | |
| ||
Prestige 128MH |
|
E t h e r n e t L A N
Telnet from any
Remote Location
Modem / ISDN TA
Modem
ISDN TA
console port. Once your Prestige is configured, you can use telnet to configure it remotely as shown in Figure
Figure
If your Prestige is configured for IPX but not IP routing in Menu 1, telnet is still available provided you assign the Prestige a correct IP address and subnet mask. When IP routing is disabled, the Prestige can still function as a host.
Telent Configuration |