ZyXEL Communications user manual Prestige 128MH PSTN Router/Hub, Field, Description, Options

Prestige 128MH PSTN Router/Hub

Table 4-1.	Remote Node Profile Menu Fields for Dial-up Lines (continued)
Field		Description	Options
Edit PPP Options		To edit the PPP options for this remote node, move the	Press space bar
		cursor to this field, use the space bar to select [Yes] and	to toggle [Yes]
		press [Enter]. This will bring you to Menu 11.2 - Remote	then press [Enter]
		Node PPP Options. For more information on configuring
		PPP options, see the section Editing PPP Options.
Rem IP Addr		This is a required field [?] if [Route] is set to [IP]. Enter
		the IP address of the remote gateway.
Edit IP/IPX/Bridge Options		To edit the parameters, select [Yes] and press [Enter].	Press space bar
		This will bring you to Menu 11.3 - Remote Node	to toggle [Yes]
		Network Layer Options. For more information on this	then press [Enter]
		screen, refer to the chapter pertaining to your specific
		protocol.
Edit Script Option		To edit the script, select [Yes] and press [Enter]. This	[Yes] then press
		will bring you to Menu 11.4 - Remote Node Script.	[Enter]
Telco Options:
Allocated Budget		This field sets a ceiling for outgoing call time for this	Default = 0
(min)		remote node. The default for this field is [0] for no
		budget control.
Period (hr)		This field sets the time interval to reset the above
		outgoing call budget control.
Session Option:		In these fields, enter the filter set(s) you wish to apply to	Default=Blank
		the incoming and outgoing traffic between this remote
Input Filter Sets,		node and your Prestige. You can choose from 12
Output Filter Sets and		different filter sets. In addition, you can link up to 4 filter
Call Filter Sets		sets together for further customization, e.g., 1, 5, 9, 12.
		Note that spaces are accepted in this field.
		For more information on customizing your filter sets, see
		Chapter 9 . The default is blank, i.e., no filters defined.

4-8 Remote Node Configuration