ZyXEL Communications 128MH user manual Your Prestige

		Prestige 128MH PSTN Router/Hub
Table 4-1.	Remote Node Profile Menu Fields for Dial-up Lines (continued)
Field		Description	Options
Incoming:	Rem Node	Enter the login name that this remote node will use when
	Login Name	it calls your Prestige.
		The login name in this field combined with the Rem Node
		Password will be used to authenticate this node.
Incoming:	Rem Node	Enter the password used when this remote node calls
	Password	your Prestige.
Incoming:	Rem CLID	This field is applicable only if [Call Direction] is either
		[Both] or [Incoming]. Otherwise, an [N/A] appears in the
		field.
		This is the Calling Line ID (the telephone number of the
		calling party) of this remote node.
		If you enable the CLID Authen field in Menu 13 – Default
		Dial In, your Prestige will check the CLID in the incoming
		call against the CLIDs in the database. If no match is
		found and CLID Authen is Required, the call will be
		dropped.
Incoming:	Callback	This field is applicable only if [Call Direction] is [Both].	[Enable]
		Otherwise, an [N/A] appears in the field.	[Disable]
		This field determines whether or not your Prestige will call
		back after receiving a call from this remote node.
		If this option is enabled, your Prestige will disconnect the
		initial call from this node and call it back at the Outgoing
		Primary Phone Number (see below).
Outgoing:	My Login	This is a required field [?] if [Call Direction] is either [Both]
	Name	or [Outgoing]. Enter the login name for your Prestige
		when it calls this remote node.

Remote Node Configuration 4-5