Prestige 128MH PSTN Router/Hub
The following table describes the SNMP configuration parameters.
Table | SNMP Configuration Menu Fields |
| |
|
|
|
|
Field |
| Description | Default |
|
|
|
|
Get Community |
| Enter the get community, which is the password for the incoming Get- and | public |
|
| GetNext- requests from the management station. |
|
|
|
|
|
Set Community |
| Enter the set community, which is the password for incoming Set- | public |
|
| requests from the management station. |
|
|
|
|
|
Trusted Host |
| If you enter a trusted host, your Prestige will only respond to SNMP | blank |
|
| messages from this address. If you leave the field blank (default), your |
|
|
| Prestige will respond to all SNMP messages it receives, regardless of |
|
|
| source. |
|
|
|
|
|
Trap: |
| Enter the trap community, which is the password sent with each trap to | public |
Community |
| the SNMP manager. |
|
|
|
|
|
Trap: |
| Enter the IP address of the station to send your SNMP traps to. | blank |
Destination |
|
|
|
|
|
|
|
Once you have completed filling in Menu 22 - SNMP Configuration, press [Enter] at the message [Press Enter to Confirm] to save your configuration, or press [Esc] to cancel.
SNMP Configuration |