ZyXEL Communications user manual Prestige 128MH WAN Port Setup

Prestige 128MH PSTN Router/Hub

2.8WAN Port Setup

This section describes how to configure the built-in modems and the WAN port on your Prestige using Menu 2- WAN Setup. We will use the term “WAN device” to mean either the built-in modems or the external modem/TA on the WAN port from now on.

Select a WAN port (modem 1, 2 or the WAN port) that you wish to configure first. Then configure the WAN port from Submenu 2.1. If advanced setup is required, go into Menu 2.2. Your Prestige will use this information to initialize the port and the attached WAN device.

2.8.1Prestige 128MH WAN Port Setup

To configure a WAN port on Prestige 128MH, follow these steps:

Step 1. Select option [2. WAN Setup] in the Main Menu by typing 2 at the menu selection number prompt.

Step 2. In Menu 2 - WAN Port Setup, as shown in Figure 2-8, enter the number (1, 2 or 3) of the WAN port you wish to configure.

2-16 Hardward Installation & Initial Setup