Prestige 128MH PSTN Router/Hub
Table | Single User Account Menu Fields | |
|
|
|
Field |
| Description |
|
| |
Single User Account | Select [Yes] to enable SUA. | |
|
|
|
Local IP Addr. |
| If your ISP did not assign you a static IP address, enter [0.0.0.0] here; |
|
| otherwise, enter that IP address here. |
|
|
|
Server IP Addr. |
| If you want to make a single server accessible to outside users, enter that |
|
| server's IP address here; otherwise, enter 0.0.0.0 in this field |
|
|
|
Press [Enter] at the message [Press ENTER to Confirm ...] to save your configuration, or press [Esc] at any time to cancel.
At this point, your Prestige will ask if you wish to test the Internet connection. If you select [Yes], the Prestige will call the ISP and test the configuration. If the test fails, note the error messages on the screen and take the appropriate troubleshooting steps.
3.6Configuring Backup ISP Accounts
If you have more than one ISP account, you can configure the secondary ISP as a backup. You can switch to the backup ISP in the event that the primary ISP is out of service. The SUA feature can be enabled for all these accounts.
3.6.1 Configure a Backup ISP
To configure a backup ISP Account, follow these steps:
Step 1. Configure your primary ISP using Menu 4, as described earlier in this chapter.
Step 2. Enter Menu 11, then select an unused remote node.
Step 3. In Menu 11.1, choose a name for your backup ISP account, then set the Active field to [No], and enter your outgoing login name, password, and phone number(s). The Remote IP Address field should be set to [1.1.1.1].
Internet Access |