ZyXEL Communications 128MH user manual System Status

Step 1.

Step 2.

Step 3.

13-2

Prestige 128MH PSTN Router/Hub

13.1 System Status

The first selection, System Status, gives you information on the version of your system firmware and the status and statistics of the ports, as shown in Figure 13-2.

		Menu 24.1 -- System Maintenance - Status
Port	Status	Speed	TXPkts	RXPkts	Errs	Tx B/s	Rx B/s	Up Time
M1	Idle	0Kbps	0	0	0	-	-	0:0
M2	Idle	0Kbps	0	0	0	-	-	0:0
WAN	Down	0Kbps	0	0	0	-	-	0:0

Total Outcall Time:		0:00:00
Ethernet:		Name: p128MH
Status: 10M/Full Duplex		RAS S/W Version: V1.6(e01) 2/6/98
TX Pkts: 26		Ethernet Address: 00:a0:c5:01:23:45
RX Pkts: 0
Collisions:	0
LAN Packet Which Triggered Last Call:
		Press Command:
CMDS: 1 -Drop M1	2-Drop M2	3-Drop WAN port 8-Drop All 9-Rst Cnt ESC-Exit

Figure 13-2. Menu 24.1 - System Maintenance - Status

Follow the procedure below to go to the System Status Menu.

Select option 24 from the Main Menu to access Menu 24 - System Maintenance. From Menu 24, select option [1. System Status].

There are five possible commands in Menu 24.1 - System Maintenance - Status.

•Entering 1 or 2 or 3 to disconnect the call on the specified WAN port;

•Entering 8 to disconnect the calls on all WAN ports,

•Entering 9 to reset the counters, and [Esc] to exit this screen.

Please note that entering 9 will reset all counters except the Total Outcall Time.

System Maintenance