ZyXEL Communications 128MH user manual Command Interpreter Mode, Call Control

Prestige 128MH PSTN Router/Hub

13.8 Command Interpreter Mode

This option allows you to enter the command interpreter mode. A list of valid commands can be found by typing [help] at the command prompt. For more detailed information, check the ZyXEL Web site or send e-mail to the ZyXEL Support Group.

13.9 Call Control

The Prestige provides two call control functions: budget management and blacklist.

The budget management function allows you to set a limit on the total outgoing call time of the Prestige over a period of time. When the total outgoing call time exceeds the limit, the current call will be dropped and any future outgoing calls will be blocked.

The blacklist function prevents the Prestige from re-dialing to an unreachable phone number. It is a list of phone numbers, up to a maximum of 14, to which the Prestige will not make an outgoing call. If the Prestige tries to dial to a phone number and fails a certain number of times

(config urable in Menu 24.9.1), then the phone number is put in the blacklist. You will have to enable the number manually before the Prestige will dial that number again.

To enter the call control menu, select option [9. Call Control] in Menu 24 to go to Menu 24.9 - System Maintenance - Call Control, as shown in Figure 13-13.

Menu 24.9 - System Maintenance - Call Control

1.Blacklist

2.Budget Management

3.Call History

Enter Menu Selection Number:

System Maintenance 13-17