ZyXEL Communications 128MH user manual Leased Line Connection, Dial-up Backup for Leased Line

Prestige 128MH PSTN Router/Hub

4.2Leased Line Connection

A leased line provides a connection that is always up without dialing and modem negotiation, which can take tens of second. The WAN port on the Prestige allows you to connect a leased line modem (async). Obviously, the Connection Type of the WAN port must be selected as [Leased] in Menu 2.1 - Async WAN Port Setup.

4.2.1 Dial-up Backup for Leased Line

If you have a dial-up line in addition to the leased line, you can use the dial-up line as a backup for the leased line in the event that the leased line is down. When the leased line connection drops, your Prestige will select an available modem to place a phone call to establish a backup connection. When the leased line is up again, your Prestige will drop the backup link.

4.2.2 Leased Line Remote Node Profile

From Submenu 11.1, select [Leased] in the Connection Type field to go to Submenu 11.1.2 - Remote Node Profile for Leased Line, as shown below in Figure 4-5.

Menu 11.1 - Remote Node Profile
Rem Node Name= ?	Route= IP
Active= Yes	Bridge= No
Connection Type= Leased
Leased Ports= 1 (r.o.)	Edit PPP Options= No
Incoming:	Rem IP Addr= ?
Rem Login= ?	Edit IP/IPX/Bridge=	No
Rem Password= ?
Outgoing:	Session Options:
My Login= ?	Input Filter Sets=
My Password= ?	Output Filter Sets=
Authen= CHAP/PAP	Idle Timeout(sec)=	300
Backup Line Call Direction=	Both

Device Type= 56K Modem

Pri Backup Phone #= ?

Sec Backup Phone #=

Press ENTER to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

Figure 4-5. Menu 11.1 - Remote Node Profile

4-18 Remote Node Configuration