ZyXEL Communications 128MH Remote Node Profile Menu Fields for Leased Lines, For backup line only

Prestige 128MH PSTN Router/Hub

Table 4-4 describes the fields in Menu 11.1.2 - Remote Node Profile for Leased Line that are specific to leased lines.

Table 4-4.	Remote Node Profile Menu Fields for Leased Lines
Field		Description	Option
Connection Type: [Leased]		Use space bar to toggle [Switch/Leased], select	[Leased]
		[Leased] and press [Enter].
Leased Port		If [Leased] is selected in Connection Type, this field	[1 (r.o.)]
		displays the WAN port that supports eased line
		connections.
		This field is read only (r.o.), since only the WAN port
		supports leased line.
		The Connection Type of the WAN port must have
		been specified as [Leased] in Menu 2.1 - Async WAN
		Port Setup.
Backup Line Call Direction		This field specifies the call direction for the backup	Press space bar
		dial-up line.	to select
			[Both/None/Out
			going/Incoming]
		• If this parameter is set to [Both], your Prestige	[Both]
		can both place and receive backup calls to/from	(default)
		this remote node.
		• Set this parameter to [None] to disable dial-up	[None]
		backup.
		• If set to Incoming, your Prestige will not place a	[Incoming]
		backup call to this remote node.
		• If set to Outgoing, your Prestige will drop any	[Outgoing]
		call from this remote node.
Device Type		This field always shows the only option modem (r.o).
(*for backup line only)
Incoming: Rem Node Login		Enter the login name that this remote node uses
Name		when it calls your Prestige. The login name in this

Remote Node Configuration 4-19