ZyXEL Communications 128MH 10 displays Menu 2.1 when configuring modem 1 and modem, Field

Prestige 128MH PSTN Router/Hub

•Figure 2-10 displays Menu 2.1 when configuring modem 1 and modem 2.

Menu 2.1 - Async WAN Port Setup

Modem Name= ZyXEL

Active= Yes

Connection Type= Switch (r.o.)

Phone Number=

Device Type= 56K Modem (r.o.)

Port Speed= 115200

AT Command String:

Init=ats0=0W2&fs95=1

Advanced Setup= No

Press ENTER to Confirm or ESC to Cancel:

Figure 2-10. Menu 2.1 - Async WAN Port Setup for Modem 1/2

Table 2-5 describes how to configure the WAN ports.

Table 2-5.	Async WAN Port Setup Menu Fields
Field	Description	Example
Modem Name	Enter a descriptive name for the Modem or ISDN TA connected to this	ZyXEL
	WAN Port.
Active	Set to [Yes] to activate a WAN port, then your Prestige will initialize the	Press space-bar
	WAN Port and the attached Modem or ISDN TA.	to toggle
		[Yes/No]
Connection	For the WAN Port, select the type of your telephone line; [Switch] for a	Press space-bar
Type	dial-up line and [Leased] for leased line. The connection types for the	to toggle
	internal modems are switched by default.
		[Switch/Leased]

2-18 Hardward Installation & Initial Setup